Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35

🚛Expédition sous 5-14 jours ouvrés 125 WATTS RMS
Hertz  |  SKU: MPK 1650.3 PRO

MPK 1650.3 PRO 2-way separate kit

€349.00
Tax included Shipping calculated at checkout.

Pre-order - Lead times and availability

Enjoy 5% off pre-order products, automatically applied at checkout.

Offer not valid on MTX Audio, Alpine, Focal, Pioneer, Kenwood, Dynavin, JVC and JBL products.

How to understand the displayed delivery times?

For greater transparency, we display the availability of each product in a box at the top of its product page:

  • 🟢 In stock: product available in our warehouse, ready to be shipped.
  • 🟠 Pre-order – X business days: average time to receive the product in our warehouse before it is shipped to you.

Delivery times are estimates and may vary depending on suppliers and shipping.

We do our best to provide you with clear and reliable information so that you can order with full knowledge of the situation.

Upon receipt of the product, your order is automatically prepared and shipped. You will receive tracking information by email.

Need fast delivery? Choose "In stock" products.

Free delivery from €49*

🚚 Free delivery on orders over €49 with Chronopost Économique to a pickup point (estimated delivery time of 4 to 10 business days).

Please note: some heavy or bulky parcels cannot be delivered to a pickup point and may require a contribution towards shipping and handling costs.

These costs are automatically calculated and displayed in your cart before you confirm your order.

Other faster delivery methods are also available depending on the products and your delivery address.

Delivery information

📦 Preparation and shipping

In-stock products ordered before 12 p.m. are generally shipped the same day. After 12 p.m., shipping generally takes place on the next business day.

Pickups are available Monday through Friday, excluding holidays.

🚚 Our delivery methods

  • Chronopost Économique pickup point: free delivery with purchases of €49 or more (4 to 10 business days).
  • Chronopost 24h pickup point: fast delivery to a pickup point.
  • 24h home delivery: our only home delivery option. Please note that this delivery method is not considered a guaranteed express delivery.

Delivery times begin once the carrier has accepted the package and are provided as estimates in business days.

Important: check that your product is listed as "In stock" on its product page. For pre-orders, shipping takes place only after the product has been received at our warehouse.

Some heavy or bulky packages may incur additional shipping and handling fees, which are automatically displayed in your cart.

⚠️ Receiving your package

Check the condition of your package before accepting it. In the event of damage, make specific reservations with the carrier or refuse the package if necessary.

If you experience any problems, please contact our customer service team promptly.

Advisory Service

Unsure about choosing a product or its compatibility? Our team is here to help!

📞 Phone: 09 85 13 66 35

💬 Live chat: directly on our website.

🕒 Our hours:

  • Tuesday to Saturday
  • Mornings: 9:30 am – 12:00 pm
  • Afternoons: 1:30 pm – 6:00 pm

Need help choosing your equipment?

Our advisors can guide you and even prepare your cart directly via chat, with products tailored to your needs.

💪 Take advantage of our technical expertise to order with complete confidence!

The Sound Auto Concept Team

Description

115W RMS 3 ohms high quality

HERTZ AUDIO: MPK 1650.3

The MPK 1650.3 audio speaker system is the two-way, two-way system of the Mille PRO line.
The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features
of the Mille Legend ML28.3.
Tetolon's dome geometry maximizes typical off-axis listening dispersion.
Rear acoustic chamber with damping material helps extend response
at lower frequencies reaching a resonance frequency of only 900 Hz.
In this way the crossover point between the tweeter and the woofer can be lowered,
which improves the sound image in the car dashboard.
The massive Neodymium motor minimizes non-linearity in handling music program with highly dynamic transients.
The CCAW (Copper Clad Aluminum Wire) telephone coil guarantees a particularly light and rigid assembly.
These technological elements interact with each other,
which translates to a high frequency extension of 28 kHz,
a record for a tweeter with a 28 mm coil.
A sleek and compact angled tweeter mount is included with the system:
This allows easy installation on both the A-pillars and the car dashboard.
The correct angle of the tweeter improves the stereo image, essential for engaging listening.

The electroacoustic parameters of the MP 165P.3 have been forged to give it the pure and solid sound
of an authentic mid-bass, designed for high dynamic systems.
The voice coil with a generous height of 14 mm,
has a nominal impedance of 3 O in addition to increased power handling.
These features provide the ability to fully exploit the power of Hertz HCP amplifiers.
and HDP as well as stable 2 O electronics.
The 95mm diameter ferrite magnet allows a linear voice coil excursion of +/- 4.5mm,
ensuring the greatest control at all times.
The borderless free surround moves a greater amount of air,
and the V-cone® profile improves the offax dispersion, the real state of car listening.
The sophisticated aluminum alloy basket neutralizes unwanted vibrations.

The MPCX 165.3 crossover creates the optimal tonal balance between the MP 28.3 woofer and the MP 165P.3 speaker.
It has bimetallic capacitors with polyester dielectric,
for maximum acoustic transparency and air coil inductors integrated on pure copper wire
with a diameter of 1 mm to eliminate saturation.
It also mounts wire-wound resistors with low parasitic inductance.
Two-position Hi-Contour control allows for fine-tuning of frequency response
of the system by optimizing the different positions of the speakers.
Above all, listeners can achieve their preferred sound with the three-position control for
the tweeter emission level with 2 dB steps (+2/0 / -2dB) of attenuation.

Component System
Size mm (in.) 165 (6.5)
Permissible power - Continuous power W 125
Permissible power - Peak power W 250
Impedance Ohm 3
Tweeter Diaphragm mm (in.) 35 (1.38)
Voice coil for subwoofer Ø mm (in.) 25 (1)
Tweeter voice coil Ø mm (in.) 28 (1.1)
Sensitivity dB SPL 93
Frequency response Hz 45 ÷ 25k
Crossover cut-off 3 kHz (Hi-Cont. = ON), 4 kHz (Hi-Cont. = OFF)
Crossing type 2-way passive crossover
Adjustment

Tweeter level +2 / 0 / -2 dB
Hi-Contour ON/OFF

Weight of a component - Woofer 1.20 (2.65)
Component Weight - Tweeter kg (lb) 0.075 (0.16)
Component Weight - Crossover kg (lb) 0.37 (0.82)


Very popular at the moment
Many people are looking at this product right now.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Cartes Bancaires
  • EPS
  • Google Pay
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store your credit card details and do not have access to your credit card information.

Kit 2 voies séparées MPK 1650.3 - Sound Auto Concept
Hertz

MPK 1650.3 PRO 2-way separate kit

€349.00

115W RMS 3 ohms high quality

HERTZ AUDIO: MPK 1650.3

The MPK 1650.3 audio speaker system is the two-way, two-way system of the Mille PRO line.
The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features
of the Mille Legend ML28.3.
Tetolon's dome geometry maximizes typical off-axis listening dispersion.
Rear acoustic chamber with damping material helps extend response
at lower frequencies reaching a resonance frequency of only 900 Hz.
In this way the crossover point between the tweeter and the woofer can be lowered,
which improves the sound image in the car dashboard.
The massive Neodymium motor minimizes non-linearity in handling music program with highly dynamic transients.
The CCAW (Copper Clad Aluminum Wire) telephone coil guarantees a particularly light and rigid assembly.
These technological elements interact with each other,
which translates to a high frequency extension of 28 kHz,
a record for a tweeter with a 28 mm coil.
A sleek and compact angled tweeter mount is included with the system:
This allows easy installation on both the A-pillars and the car dashboard.
The correct angle of the tweeter improves the stereo image, essential for engaging listening.

The electroacoustic parameters of the MP 165P.3 have been forged to give it the pure and solid sound
of an authentic mid-bass, designed for high dynamic systems.
The voice coil with a generous height of 14 mm,
has a nominal impedance of 3 O in addition to increased power handling.
These features provide the ability to fully exploit the power of Hertz HCP amplifiers.
and HDP as well as stable 2 O electronics.
The 95mm diameter ferrite magnet allows a linear voice coil excursion of +/- 4.5mm,
ensuring the greatest control at all times.
The borderless free surround moves a greater amount of air,
and the V-cone® profile improves the offax dispersion, the real state of car listening.
The sophisticated aluminum alloy basket neutralizes unwanted vibrations.

The MPCX 165.3 crossover creates the optimal tonal balance between the MP 28.3 woofer and the MP 165P.3 speaker.
It has bimetallic capacitors with polyester dielectric,
for maximum acoustic transparency and air coil inductors integrated on pure copper wire
with a diameter of 1 mm to eliminate saturation.
It also mounts wire-wound resistors with low parasitic inductance.
Two-position Hi-Contour control allows for fine-tuning of frequency response
of the system by optimizing the different positions of the speakers.
Above all, listeners can achieve their preferred sound with the three-position control for
the tweeter emission level with 2 dB steps (+2/0 / -2dB) of attenuation.

Component System
Size mm (in.) 165 (6.5)
Permissible power - Continuous power W 125
Permissible power - Peak power W 250
Impedance Ohm 3
Tweeter Diaphragm mm (in.) 35 (1.38)
Voice coil for subwoofer Ø mm (in.) 25 (1)
Tweeter voice coil Ø mm (in.) 28 (1.1)
Sensitivity dB SPL 93
Frequency response Hz 45 ÷ 25k
Crossover cut-off 3 kHz (Hi-Cont. = ON), 4 kHz (Hi-Cont. = OFF)
Crossing type 2-way passive crossover
Adjustment

Tweeter level +2 / 0 / -2 dB
Hi-Contour ON/OFF

Weight of a component - Woofer 1.20 (2.65)
Component Weight - Tweeter kg (lb) 0.075 (0.16)
Component Weight - Crossover kg (lb) 0.37 (0.82)


View product