Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35
Measure, test and analyze your car audio system with our selection of car audio measuring devices: SPL sensors, acoustic pressure measuring systems and audio system testers.
To tune, diagnose or measure the performance of a car audio system, measuring devices allow you to go further than simply tuning by ear. Discover solutions designed for SPL measurement, audio system monitoring and vehicle audio system diagnostics.
The type of device depends on what you want to monitor: acoustic pressure level, SPL performance or diagnostics of a car audio system.
SPL measuring systems are designed to measure the acoustic pressure produced by a system. They are particularly useful for demonstration vehicles, high-power systems and SPL competition projects.
A car audio tester allows you to perform various checks during the installation, tuning or diagnostics of a system. The available functions vary depending on the device used.
In the world of SPL, the performance of a system is measured with a suitable system capable of analyzing the acoustic pressure produced in the vehicle. These tools are used to compare different settings, work on a peak frequency or measure the performance of a subwoofer system.
For an SPL-oriented system, a measuring system allows you to quantify performance and objectively compare different configurations or different settings.
Measurements allow you to compare the level achieved at different frequencies and identify the range in which the vehicle and the system produce their highest level.
Repeatable measurement allows you to objectively compare the results obtained after a modification to the system, the enclosure or the settings, while maintaining a consistent measurement protocol.
For a show car or a high-power system, measurement allows you to know the level actually produced rather than estimating performance by ear alone.
SPL enthusiasts use measuring systems to work on their systems and track the improvements achieved after each modification.
An audio testing device can be useful when installing an amplifier, DSP, speakers or a subwoofer. Depending on the equipment, different functions allow you to monitor and diagnose the system to facilitate installation and tuning.
A phone's built-in microphone is primarily designed for voice and everyday use. To accurately measure a very powerful car audio system or perform consistent SPL comparisons, use a sensor and a measuring system designed for this purpose.
Start by defining what you want to measure. A device designed for SPL measurement may not necessarily meet the same need as a multifunctional audio system tester.
Measuring devices can be used by both a car audio installer monitoring a system and an enthusiast wishing to measure and optimize their vehicle's performance.
Discover SSA measuring solutions with the AVM and Accuwave Pressure Monitor APM-X, as well as an Auto-Connect multifunctional audio system tester for your car audio installation and diagnostics work.
Depending on the model, it allows you to measure performance, monitor certain parameters or facilitate the diagnostics and tuning of a car audio system.
SPL stands for Sound Pressure Level, or acoustic pressure level. This measurement allows you to quantify, among other things, the sound level produced by a system.
For measurements suitable for high-power systems, use a measuring system and sensor designed for the relevant acoustic pressure levels.
An app can provide an indication under certain conditions, but a smartphone microphone is not a substitute for a specialized SPL sensor for high-power car audio systems.
This allows you to compare the level achieved at different frequencies and identify the range where the system and the vehicle produce their maximum level.
Measurement does not directly change performance, but it allows you to objectively compare different configurations and different settings.
No. They can also be used for demonstration vehicles, high-power systems, car audio workshops and various diagnostic work.
An SPL device is primarily designed for measuring acoustic pressure. An audio tester may offer other monitoring and diagnostic functions depending on the model.
Choose a system whose range and measurement type are suitable for the levels produced by your system and the intended use.
Discover the Ground Zero Iridium range, combining German expertise, performance, and excellent value for money. Speakers, subwoofers, active and passive subwoofers, amplifiers: everything you need to improve your car's sound...
Sound Auto Concept will be present at the Show Team Oldschool Tuning Act #4 on April 17 and 18, 2027, in Bessan. Visit our 90 m² multi-brand car audio stand...
Sound Auto Concept will be present at the Roussillon Motors Show 2026, on November 14 and 15 at the Circuit du Roussillon in Rivesaltes. Come and see our Show Car...
Discover Reiss Audio at Sound Auto Concept: SPL subwoofers up to 5000 W RMS, high-power amplifiers, midbass, tweeters, and accessories for your car audio installations.
Discover the Ground Zero GZCS 20SUB-ACT 20 cm (8"), ideal for utility vehicles and small cabins, and the GZCS 25SUB-ACT 25 cm (10"), designed for standard vehicles seeking more bass....
Deaf Bonce unveils its new generation of DB subwoofers. From the 3500W RMS DB-3.5K to the monstrous 7500W RMS DB-7.5K Neo, discover a range designed for high-power car audio, SQL,...
