Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35

Current promotions! Discover our leading brands at reduced prices!

Monoblock Amplifiers

Discover our selection of monoblock car amplifiers, specially designed to efficiently power subwoofers and enhance the bass in your audio system. Enjoy a wide choice at the best prices, with renowned brands such as Soundigital, Rockford Fosgate, DD Audio, Ground Zero, Alpine, MTX, and JBL.

View as
MONOBLOCK AMPLIFIER • SUBWOOFER • CLASS D • CAR AUDIO

Monoblock amplifiers for subwoofers from 500 W to high-power Car Audio

Discover our selection of car monoblock amplifiers: Class D mono amps to power one or more subwoofers, available in different power levels and impedances for daily Car Audio, high-power, and SPL setups.

CAR SUBWOOFER MONO AMPLIFIER

Give your subwoofer the power it needs

The monoblock amplifier is primarily used to power the subwoofer section of a Car Audio setup. A single amplification channel provides significant power to low frequencies, with models available for 1, 2, or 4-ohm loads depending on the model.

Mono 1 dedicated channel
Class D High efficiency
1 / 2 / 4 Ω Depending on the model
SPL Up to high power
THE HEART OF YOUR SUBWOOFER SECTION

A properly chosen amp completely changes your system

An excellent subwoofer cannot properly utilize its capabilities if the amplification is not suitable. Choosing a mono amp must take into account the RMS power, but above all the final impedance of your setup.

More control Amplification dedicated to your bass section.
Suitable power From small subwoofers to high-power systems.
Wide selection Many power levels and impedances available.
CHOOSE BY POWER

Which monoblock amp for your subwoofer?

The required power depends on your subwoofer, its number of coils, their impedance, and the wiring used. Always compare RMS power at the same impedance.

500–800 W Compact systems
1000–1500 W Powerful Car Audio
2000–5000 W High power
5000 W+ SPL & large systems

Mono amp 500 to 800 W RMS

A range suitable for many single subwoofers and setups looking for a significant bass improvement without switching to an extreme power supply.

Mono amp 1000 to 1500 W RMS

Very popular in Car Audio, this power level can power many high-power subwoofers or certain configurations using multiple speakers.

Mono amp 2000 to 5000 W RMS

Designed for demanding setups requiring a lot of power. At this level, the power supply and wiring become particularly important.

Mono amp High-power SPL

For extreme setups, Sound Auto Concept also offers monoblock amplifiers of several thousand RMS Watts designed for large Car Audio and SPL systems.

1 OHM • 2 OHMS • 4 OHMS

Impedance is just as important as power

An amplifier does not deliver the same power at 1, 2, or 4 ohms. Before choosing your monoblock amp, calculate the final impedance obtained with the coils of your subwoofer or subwoofers.

For example, an amplifier rated at 1000 W RMS at 1 ohm will generally not deliver the same power at 2 or 4 ohms. Always check the power ratings provided by the manufacturer for each load.

1 OHM MONOBLOCK AMPLIFIER

Why do so many Car Audio amps run at 1 Ω?

Many Class D mono amplifiers are designed to run at a low impedance to provide significant power to the subwoofer section. However, the setup must respect the minimum impedance supported by the amplifier.

Amplifier 1 ohm

Very common for high-power subwoofer systems. Check that the coil wiring actually allows you to achieve a load compatible with the amp.

Amplifier 2 ohms

Several amplifiers are available or optimized for use at 2 ohms. They can be interesting depending on the configuration of your subwoofer's coils.

CLASS D • EFFICIENCY

Why Class D dominates subwoofer amps

Class D provides high electrical efficiency and develops a lot of power in dimensions often more compact than certain traditional architectures.

This is why it is widely used on monoblock amplifiers designed for subwoofers, especially when the required power becomes significant.

1000 W RMS subwoofer? Don't just look for an amp marked "1000 W".

Check at what impedance your subwoofer will actually be wired, then look at the RMS power delivered by the amplifier at that same impedance. MAX, PEAK, or marketing power should not replace the comparison of RMS power.

BUYING GUIDE

How to choose your monoblock amplifier?

To correctly select your subwoofer amp, start with your setup and not the number of Watts displayed on the front.

✓ Subwoofer RMS — look at the continuous power
✓ Coils — single or double coil
✓ Impedance — calculate the final load
✓ Amp power — compare at the correct impedance
✓ Power supply — match the cable gauge
✓ Protection — use a properly sized fuse
1 OR MULTIPLE SUBWOOFERS

A monoblock amp can power multiple subwoofers

"Monoblock" means it has one amplification channel, not that it is limited to a single subwoofer. Multiple subwoofers can be connected to the same amp when their wiring produces a compatible impedance and the available power matches the whole.

ELECTRICAL INSTALLATION

More power requires a suitable power supply

A high-power amplifier can require a lot of current. The power cable, ground, fuses, battery, and, on the largest setups, the alternator's charging capacity must be consistent with the system's consumption.

A poor power supply can cause voltage drops, limit performance, and strain the equipment.

Do not size the cable based solely on the advertised RMS Watts.

Consumption depends notably on the power actually used, the amplifier's efficiency, and the vehicle's voltage. For a major setup, base yourself on the manufacturer's recommendations, the maximum consumption, and the amp's fuses.

FROM DAILY TO SPL

A mono amp for every setup level

Daily setup Power a subwoofer cleanly in your vehicle.
High power Several thousand Watts for large systems.
SPL Amplifiers dedicated to the most demanding setups.
WIDE SELECTION OF CAR AUDIO BRANDS

SounDigital, Ground Zero, DD Audio, Deaf Bonce, ESX & more

At Sound Auto Concept, find a wide selection of monoblock amplifiers from specialized brands: SounDigital, Ground Zero Audio, DD Audio, Deaf Bonce, ESX Car Audio, Reiss Audio, Stetsom, Hifonics, Rockford Fosgate, GAS Audio Power, Bass Habit, Hertz, Gladen, Musway, and many more.

FREQUENTLY ASKED QUESTIONS

FAQ – Car Audio Monoblock Amplifiers

What is a monoblock amplifier?

A monoblock amp has a single amplification channel. In Car Audio, it is very often used to power one or more subwoofers.

Which amp should I choose for my subwoofer?

Look at the subwoofer's RMS power, its coils and the final wiring impedance. Then compare this value to the RMS power delivered by the amp at the same impedance.

What is the difference between a 1-ohm and 2-ohm amp?

This corresponds notably to the minimum load or the load for which certain power levels are rated. Always check the exact specifications of each model.

Can you use an amp more powerful than the subwoofer?

It is possible in a properly tuned setup, but the available power must be managed. Gain is not a volume knob, and a bad setting can damage the subwoofer.

Can a monoblock amp power two subwoofers?

Yes. The final wiring impedance must be compatible with the amplifier, and its power must be suitable for the entire set of subwoofers.

Why choose a Class D amp for a subwoofer?

Class D offers high efficiency and allows you to develop a lot of power with often reduced dimensions, making it very suitable for subwoofer sections.

What power cable for a mono amp?

The gauge depends on the amplifier's consumption, the cable length, and the electrical system. Consult the manufacturer's recommendations and use a suitable protection near the battery.

1000 W MAX and 1000 W RMS, is it the same?

No. To pair an amp and a subwoofer, mainly use the RMS power compared at the correct impedance rather than a MAX or PEAK value.

Which monoblock amp should I choose for SPL?

The choice depends on the subwoofers, their final impedance, the allowable power, and above all the electrical capacity of the vehicle. Large systems may require several thousand Watts and a heavily reinforced power supply.

View all
Back to top