Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35
Four-Connect
FOUR Connect 4-800150 STAGE1 – 5.5m OFC DNR 2-Channel RCA Cable (bulk)
Rockford Fosgate
Rockford Fosgate RFI-20 - 6m RCA Audio Cable for Amplifier
Four-Connect
Four Connect STAGE2 - 0.75m 2 Channel Triple Shielded RCA Cable
Rockford Fosgate
Rockford Fosgate RFIT-20 - 6m RCA Audio Cable Speaker / Amplifier
Discover our car RCA cables designed to transmit the audio signal between a car stereo, DSP processor and amplifier. 2-channel, 4-channel, shielded, OFC and different lengths to complete your Car Audio installation.
The Car Audio RCA cable transmits the low-level audio signal between a car stereo, a DSP or audio processor and an amplifier. Choosing a suitable length and a properly shielded cable helps create a clean audio installation tailored to your vehicle.
The RCA carries the audio signal from the source to the signal amplification and processing equipment.
When the car stereo has RCA pre-amplifier outputs, the RCA cable transmits the signal to the amplifier. The number of pairs required depends on the configuration and the number of channels used.
In an installation equipped with a DSP processor, several RCA connections may be required between the DSP outputs and the different amplification channels of the Car Audio system.
A car contains many pieces of equipment and electrical cables. RCA cable shielding helps protect the audio signal against certain electromagnetic interference. For demanding installations, reinforced shielding RCAs are available, with triple or quadruple shielding depending on the model.
Choose a length suitable for the location of your car stereo, DSP and amplifier to avoid an unnecessarily long cable.
The 2-channel RCA is very common for connecting a pair of audio outputs to an amplifier. It can notably be used with a stereo amplifier or monoblock amplifier depending on the system configuration.
The 4-channel RCA cable allows you to group several connections in a single bundle. It is particularly practical for 4-channel amplifiers and certain DSP installations.
Our selection includes different ranges of RCA cables, from simple models intended for common installations to reinforced shielding and OFC conductor cables intended for more demanding Car Audio systems.
The choice depends mainly on the number of channels required, the distance between the devices and the level of protection desired against interference.
Don't know which RCA to choose? Contact Sound Auto Concept with your car stereo, DSP and amplifier. We can help you determine the number of channels and the length required.
Cable routing is part of a neat Car Audio installation . When routing cables through the vehicle, it is advisable to neatly organize the audio connections and power cables.
During installation, avoid whenever possible routing the RCA cable parallel to the power cable over a long distance. A neat organization of the wiring also helps facilitate future interventions.
A monoblock amplifier for subwoofers generally uses an RCA input. Check the available outputs on your car stereo or DSP and choose a sufficient length to reach the amplifier.
An RCA cable transmits the low-level audio signal between a source such as a car stereo or DSP and an amplifier.
Check the number of channels required, the length between the source and the amplifier, as well as the level of shielding of the cable.
It depends on the location of the amplifier. For an amp installed in the trunk and a source at the front, cables around 5 meters are commonly used. Measure your route before ordering.
A 2-channel RCA cable carries two audio signals while a 4-channel model allows you to carry four channels, practical especially with certain multi-channel amplifiers.
Shielding helps protect the audio signal against certain electromagnetic interference present in the electrical environment of the vehicle.
Interference can have several origins: cable routing, grounding, power supply, source, amplifier or RCA cable. You must therefore diagnose the entire installation before attributing the problem to the RCA.
Choose a length suitable for the distance between the DSP and the amplifier, as well as the number of channels corresponding to the DSP outputs used.
When the installation allows, it is preferable to avoid routing RCA cables over a long distance parallel to power cables.
A monoblock amplifier can be connected to a subwoofer or pre-out compatible with the car stereo or DSP. Check the available connectors and choose the suitable length.
Discover the Ground Zero Iridium range, combining German expertise, performance, and excellent value for money. Speakers, subwoofers, active and passive subwoofers, amplifiers: everything you need to improve your car's sound...
Sound Auto Concept will be present at the Show Team Oldschool Tuning Act #4 on April 17 and 18, 2027, in Bessan. Visit our 90 m² multi-brand car audio stand...
Sound Auto Concept will be present at the Roussillon Motors Show 2026, on November 14 and 15 at the Circuit du Roussillon in Rivesaltes. Come and see our Show Car...
Discover Reiss Audio at Sound Auto Concept: SPL subwoofers up to 5000 W RMS, high-power amplifiers, midbass, tweeters, and accessories for your car audio installations.
Discover the Ground Zero GZCS 20SUB-ACT 20 cm (8"), ideal for utility vehicles and small cabins, and the GZCS 25SUB-ACT 25 cm (10"), designed for standard vehicles seeking more bass....
Deaf Bonce unveils its new generation of DB subwoofers. From the 3500W RMS DB-3.5K to the monstrous 7500W RMS DB-7.5K Neo, discover a range designed for high-power car audio, SQL,...