Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35

✅ En stock 1500 WATTS RMS
GAS Audio Power  |  SKU: GAS Max PA1 1500.1D

GAS Max PA1 1500.1D

€299.00
Tax included Shipping calculated at checkout.

Pre-order - Lead times and availability

Enjoy 5% off pre-order products, automatically applied at checkout.

Offer not valid on MTX Audio, Alpine, Focal, Pioneer, Kenwood, Dynavin, JVC and JBL products.

How to understand the displayed delivery times?

For greater transparency, we display the availability of each product in a box at the top of its product page:

  • 🟢 In stock: product available in our warehouse, ready to be shipped.
  • 🟠 Pre-order – X business days: average time to receive the product in our warehouse before it is shipped to you.

Delivery times are estimates and may vary depending on suppliers and shipping.

We do our best to provide you with clear and reliable information so that you can order with full knowledge of the situation.

Upon receipt of the product, your order is automatically prepared and shipped. You will receive tracking information by email.

Need fast delivery? Choose "In stock" products.

Free delivery from €49*

🚚 Free delivery on orders over €49 with Chronopost Économique to a pickup point (estimated delivery time of 4 to 10 business days).

Please note: some heavy or bulky parcels cannot be delivered to a pickup point and may require a contribution towards shipping and handling costs.

These costs are automatically calculated and displayed in your cart before you confirm your order.

Other faster delivery methods are also available depending on the products and your delivery address.

Delivery information

📦 Preparation and shipping

In-stock products ordered before 12 p.m. are generally shipped the same day. After 12 p.m., shipping generally takes place on the next business day.

Pickups are available Monday through Friday, excluding holidays.

🚚 Our delivery methods

  • Chronopost Économique pickup point: free delivery with purchases of €49 or more (4 to 10 business days).
  • Chronopost 24h pickup point: fast delivery to a pickup point.
  • 24h home delivery: our only home delivery option. Please note that this delivery method is not considered a guaranteed express delivery.

Delivery times begin once the carrier has accepted the package and are provided as estimates in business days.

Important: check that your product is listed as "In stock" on its product page. For pre-orders, shipping takes place only after the product has been received at our warehouse.

Some heavy or bulky packages may incur additional shipping and handling fees, which are automatically displayed in your cart.

⚠️ Receiving your package

Check the condition of your package before accepting it. In the event of damage, make specific reservations with the carrier or refuse the package if necessary.

If you experience any problems, please contact our customer service team promptly.

Advisory Service

Unsure about choosing a product or its compatibility? Our team is here to help!

📞 Phone: 09 85 13 66 35

💬 Live chat: directly on our website.

🕒 Our hours:

  • Tuesday to Saturday
  • Mornings: 9:30 am – 12:00 pm
  • Afternoons: 1:30 pm – 6:00 pm

Need help choosing your equipment?

Our advisors can guide you and even prepare your cart directly via chat, with products tailored to your needs.

💪 Take advantage of our technical expertise to order with complete confidence!

The Sound Auto Concept Team

Description

MAXIMUM EFFICIENCY ADVANCED

The MAX PA1 Series amplifiers are the next generation of high-efficiency, full-range Class D amplifiers, expertly engineered with hand-picked, high-quality components and innovative design features that ensure maximum long-term output performance.

VCC – OPTIMIZED AIRFLOW

The unique extruded aluminum heat sink with a star-reinforced backplate features thermal properties developed to optimize and control amplifier temperature. The GAS VCC (Vented Cross Cooling) system ensures a constant flow of cool air to the front of the components, exhausting hot air through the thermal vents on the other side of the chassis.

HIGH QUALITY VERSATILITY

The advanced, wide-bandwidth Class D circuitry, mounted on a 4-layer PCB, allows you to connect any type of speaker: subwoofers, loudspeakers, tweeters or coaxial speakers. The high-pass/band-pass filter is adjustable from 15 to 80 Hz, and the low-pass filter from 50 Hz to 22,000 Hz. A 0 to 12 dB bass equalizer allows you to refine the low frequencies (35 to 70 Hz). The PA1-1500.1DZ and PA1-3000.1DZ are available in Z1 (maximum power at 1 ohm) and Z2 (maximum power at 2 ohms) versions to suit all configurations.

ENERGY MANAGEMENT AND CONTROL

The MAX PA1 series' high, continuous power is made possible by a high-voltage stabilized power supply that perfectly monitors the vehicle's battery voltage fluctuations. The amplifiers also feature a four-way protection circuit: thermal protection, short-circuit protection, overload protection, and power-up timeout.

Setting (and maintaining) the correct output level is optimized with Clip LEDs on the amplifier and the wired remote control - No Clip LED indicates distortion below 1%, anything above and the advanced protection circuitry kicks in. To ensure a safe and stable input signal, all models are equipped with high-quality Tiffany RCA connectors.

SIZE MATTERS

MAX PA1 amplifiers feature dual 8AWG (10 mm²) speaker outputs and standard-sized power and ground connectors. The PA1-1500.1DZ1/2 features a 2AWG (35 mm²) connector, the PA1-3000.1DZ1/2 features a 0AWG (50 mm²) connector, and the larger PA1-5000.1DZ1 features dual 0AWG (50 mm²) connectors.

Component

Amplifier

Chains

A

Input mode

Mono

RMS power (1 Ohm)

1x1500W

RMS power (2 Ohm)

1x850W

RMS power (4 Ohm)

1x500W

Frequency response

15-22000 Hz

Low-pass filter

50-22000 Hz

High-pass filter

15-80 Hz

Signal-to-noise ratio (A-weighted)

>92 dB

Bass equalizer

0-12 dB at 45 Hz

Crossing slope

12 dB

Supply voltage

10-16 V

REM voltage

10-16 V

Input sensitivity

0.2-10 V

THD

<0.1%

Power fuse

N / A

Damping factor

> 120

RCA line output

Yes

Very popular at the moment
Many people are looking at this product right now.

Payment &amp; Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Cartes Bancaires
  • EPS
  • Google Pay
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store your credit card details and do not have access to your credit card information.

GAS Max PA1 1500.1D - Sound Auto Concept
GAS Audio Power

GAS Max PA1 1500.1D

€299.00

MAXIMUM EFFICIENCY ADVANCED

The MAX PA1 Series amplifiers are the next generation of high-efficiency, full-range Class D amplifiers, expertly engineered with hand-picked, high-quality components and innovative design features that ensure maximum long-term output performance.

VCC – OPTIMIZED AIRFLOW

The unique extruded aluminum heat sink with a star-reinforced backplate features thermal properties developed to optimize and control amplifier temperature. The GAS VCC (Vented Cross Cooling) system ensures a constant flow of cool air to the front of the components, exhausting hot air through the thermal vents on the other side of the chassis.

HIGH QUALITY VERSATILITY

The advanced, wide-bandwidth Class D circuitry, mounted on a 4-layer PCB, allows you to connect any type of speaker: subwoofers, loudspeakers, tweeters or coaxial speakers. The high-pass/band-pass filter is adjustable from 15 to 80 Hz, and the low-pass filter from 50 Hz to 22,000 Hz. A 0 to 12 dB bass equalizer allows you to refine the low frequencies (35 to 70 Hz). The PA1-1500.1DZ and PA1-3000.1DZ are available in Z1 (maximum power at 1 ohm) and Z2 (maximum power at 2 ohms) versions to suit all configurations.

ENERGY MANAGEMENT AND CONTROL

The MAX PA1 series' high, continuous power is made possible by a high-voltage stabilized power supply that perfectly monitors the vehicle's battery voltage fluctuations. The amplifiers also feature a four-way protection circuit: thermal protection, short-circuit protection, overload protection, and power-up timeout.

Setting (and maintaining) the correct output level is optimized with Clip LEDs on the amplifier and the wired remote control - No Clip LED indicates distortion below 1%, anything above and the advanced protection circuitry kicks in. To ensure a safe and stable input signal, all models are equipped with high-quality Tiffany RCA connectors.

SIZE MATTERS

MAX PA1 amplifiers feature dual 8AWG (10 mm²) speaker outputs and standard-sized power and ground connectors. The PA1-1500.1DZ1/2 features a 2AWG (35 mm²) connector, the PA1-3000.1DZ1/2 features a 0AWG (50 mm²) connector, and the larger PA1-5000.1DZ1 features dual 0AWG (50 mm²) connectors.

Component

Amplifier

Chains

A

Input mode

Mono

RMS power (1 Ohm)

1x1500W

RMS power (2 Ohm)

1x850W

RMS power (4 Ohm)

1x500W

Frequency response

15-22000 Hz

Low-pass filter

50-22000 Hz

High-pass filter

15-80 Hz

Signal-to-noise ratio (A-weighted)

>92 dB

Bass equalizer

0-12 dB at 45 Hz

Crossing slope

12 dB

Supply voltage

10-16 V

REM voltage

10-16 V

Input sensitivity

0.2-10 V

THD

<0.1%

Power fuse

N / A

Damping factor

> 120

RCA line output

Yes

View product