Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35

Current promotions! Discover our leading brands at reduced prices!

✅ En stock 4 x 100 Watts RMS at 2 Ohms
Gladen German Technology  |  SKU: GLADEN MIQ4

GLADEN MIQ4 – 4-Channel Micro Amplifier 4 x 100 WRMS 2 Ohm

€199.00
Tax included Shipping calculated at checkout.

Pre-order - Lead times and availability

Enjoy 5% off pre-order products, automatically applied at checkout.

Offer not valid on MTX Audio, Alpine, Focal, Pioneer, Kenwood, Dynavin, JVC and JBL products.

How to understand the displayed delivery times?

For greater transparency, we display the availability of each product in a box at the top of its product page:

  • 🟢 In stock: product available in our warehouse, ready to be shipped.
  • 🟠 Pre-order – X business days: average time to receive the product in our warehouse before it is shipped to you.

Delivery times are estimates and may vary depending on suppliers and shipping.

We do our best to provide you with clear and reliable information so that you can order with full knowledge of the situation.

Upon receipt of the product, your order is automatically prepared and shipped. You will receive tracking information by email.

Need fast delivery? Choose "In stock" products.

Free delivery from €49*

🚚 Free delivery on orders over €49 with Chronopost Économique to a pickup point (estimated delivery time of 4 to 10 business days).

Please note: some heavy or bulky parcels cannot be delivered to a pickup point and may require a contribution towards shipping and handling costs.

These costs are automatically calculated and displayed in your cart before you confirm your order.

Other faster delivery methods are also available depending on the products and your delivery address.

Delivery information

📦 Preparation and shipping

In-stock products ordered before 12 p.m. are generally shipped the same day. After 12 p.m., shipping generally takes place on the next business day.

Pickups are available Monday through Friday, excluding holidays.

🚚 Our delivery methods

  • Chronopost Économique pickup point: free delivery with purchases of €49 or more (4 to 10 business days).
  • Chronopost 24h pickup point: fast delivery to a pickup point.
  • 24h home delivery: our only home delivery option. Please note that this delivery method is not considered a guaranteed express delivery.

Delivery times begin once the carrier has accepted the package and are provided as estimates in business days.

Important: check that your product is listed as "In stock" on its product page. For pre-orders, shipping takes place only after the product has been received at our warehouse.

Some heavy or bulky packages may incur additional shipping and handling fees, which are automatically displayed in your cart.

⚠️ Receiving your package

Check the condition of your package before accepting it. In the event of damage, make specific reservations with the carrier or refuse the package if necessary.

If you experience any problems, please contact our customer service team promptly.

Advisory Service

Unsure about choosing a product or its compatibility? Our team is here to help!

📞 Phone: 09 85 13 66 35

💬 Live chat: directly on our website.

🕒 Our hours:

  • Tuesday to Saturday
  • Mornings: 9:30 am – 12:00 pm
  • Afternoons: 1:30 pm – 6:00 pm

Need help choosing your equipment?

Our advisors can guide you and even prepare your cart directly via chat, with products tailored to your needs.

💪 Take advantage of our technical expertise to order with complete confidence!

The Sound Auto Concept Team

Description

Four channels, minimal footprint

The GLADEN MIQ4 packs Class D amplification into a casing measuring just 116 × 90 × 37.5 mm. A compact solution for powering front and rear speakers while retaining your car stereo.

4 × 100 W RMS
at 2 Ω
4 × 60 W RMS
at 4 Ω
116 × 90 mm
Smaller than a postcard

Highlights

Compact integration

A micro format and a height of 37.5 mm for installations where space is limited.

High-level connection

Four input channels for connecting the car stereo's speaker outputs without an additional converter.

Scalable system

A stereo low-level RCA output for transmitting the signal to another amplifier.

Description

Want to amplify the front and rear without dedicating a large space to electronics? The GLADEN MIQ4 from the MiQ series combines four power channels with a particularly compact casing. Its rated power reaches 4 × 60 W RMS at 4 Ω or 4 × 100 W RMS at 2 Ω. Available from Sound Auto Concept, this micro amplifier is suitable for a universal installation, subject to checking the available connection and space in the vehicle.

Its four-channel high-level input connects directly to the speaker outputs of an original or aftermarket car stereo. In the absence of a remote control output, automatic signal detection ensures the amplifier turns on.

  • Two independently adjustable filtering sections for the front and rear.
  • High-pass, band-pass, or low-pass modes available for each pair of channels.
  • Crossover frequencies adjustable from 40 to 250 Hz.
  • Two-channel low-level output on a pair of RCA jacks integrated into the wiring harness, to upgrade the system without modifying the car stereo wiring.

Technical specifications

Feature Value
Brand Gladen Audio
Model / Series MIQ4 / MiQ
Type Class D micro power amplifier
Number of channels 4
RMS power at 2 Ω 4 × 100 W
RMS power at 4 Ω 4 × 60 W
Input High-level, 4 channels
Automatic turn-on Signal detection
Filtering Two independent front / rear sections; high-pass, band-pass, low-pass
Crossover frequency adjustment 40 to 250 Hz
Low-level output 2 channels, pair of RCA connectors on harness
Casing dimensions 116 × 90 × 37.5 mm
Announced compatibility Universal, all brands; connection to be checked according to the vehicle
SKU 14189
EAN 4260242466972
Reported volumetric weight 1.5 kg; does not correspond to the actual weight of the product

Why choose it

  • To amplify four speakers with a discreet and compact casing.
  • To retain a car stereo without RCA outputs thanks to the high-level input.
  • To separately adjust the filtering of the front and rear channels.
  • To allow for the addition of another amplifier thanks to the stereo RCA output.
⚠️ IMPORTANT - INSTALLATION: It is IMPERATIVE to connect this amplifier to the impedance recommended by the manufacturer and to use the recommended cable size. For amplifiers over 2000 W RMS, the vehicle's original battery is no longer sufficient. It is strongly recommended to adapt the power supply (additional battery, reinforced alternator) to the amplifier's consumption to avoid any risk of failure and ensure optimal performance. CAUTION: Any voltage drop below 12V can damage the product.
A compact foundation for your four-channel installation.

Choose the MIQ4 for its small footprint, high-level connection, and independent front / rear settings.

Very popular at the moment
Many people are looking at this product right now.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Cartes Bancaires
  • EPS
  • Google Pay
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store your credit card details and do not have access to your credit card information.

Gladen German Technology

GLADEN MIQ4 – 4-Channel Micro Amplifier 4 x 100 WRMS 2 Ohm

€199.00

Four channels, minimal footprint

The GLADEN MIQ4 packs Class D amplification into a casing measuring just 116 × 90 × 37.5 mm. A compact solution for powering front and rear speakers while retaining your car stereo.

4 × 100 W RMS
at 2 Ω
4 × 60 W RMS
at 4 Ω
116 × 90 mm
Smaller than a postcard

Highlights

Compact integration

A micro format and a height of 37.5 mm for installations where space is limited.

High-level connection

Four input channels for connecting the car stereo's speaker outputs without an additional converter.

Scalable system

A stereo low-level RCA output for transmitting the signal to another amplifier.

Description

Want to amplify the front and rear without dedicating a large space to electronics? The GLADEN MIQ4 from the MiQ series combines four power channels with a particularly compact casing. Its rated power reaches 4 × 60 W RMS at 4 Ω or 4 × 100 W RMS at 2 Ω. Available from Sound Auto Concept, this micro amplifier is suitable for a universal installation, subject to checking the available connection and space in the vehicle.

Its four-channel high-level input connects directly to the speaker outputs of an original or aftermarket car stereo. In the absence of a remote control output, automatic signal detection ensures the amplifier turns on.

  • Two independently adjustable filtering sections for the front and rear.
  • High-pass, band-pass, or low-pass modes available for each pair of channels.
  • Crossover frequencies adjustable from 40 to 250 Hz.
  • Two-channel low-level output on a pair of RCA jacks integrated into the wiring harness, to upgrade the system without modifying the car stereo wiring.

Technical specifications

Feature Value
Brand Gladen Audio
Model / Series MIQ4 / MiQ
Type Class D micro power amplifier
Number of channels 4
RMS power at 2 Ω 4 × 100 W
RMS power at 4 Ω 4 × 60 W
Input High-level, 4 channels
Automatic turn-on Signal detection
Filtering Two independent front / rear sections; high-pass, band-pass, low-pass
Crossover frequency adjustment 40 to 250 Hz
Low-level output 2 channels, pair of RCA connectors on harness
Casing dimensions 116 × 90 × 37.5 mm
Announced compatibility Universal, all brands; connection to be checked according to the vehicle
SKU 14189
EAN 4260242466972
Reported volumetric weight 1.5 kg; does not correspond to the actual weight of the product

Why choose it

  • To amplify four speakers with a discreet and compact casing.
  • To retain a car stereo without RCA outputs thanks to the high-level input.
  • To separately adjust the filtering of the front and rear channels.
  • To allow for the addition of another amplifier thanks to the stereo RCA output.
⚠️ IMPORTANT - INSTALLATION: It is IMPERATIVE to connect this amplifier to the impedance recommended by the manufacturer and to use the recommended cable size. For amplifiers over 2000 W RMS, the vehicle's original battery is no longer sufficient. It is strongly recommended to adapt the power supply (additional battery, reinforced alternator) to the amplifier's consumption to avoid any risk of failure and ensure optimal performance. CAUTION: Any voltage drop below 12V can damage the product.
A compact foundation for your four-channel installation.

Choose the MIQ4 for its small footprint, high-level connection, and independent front / rear settings.

View product