Customer service: Mon.–Sat. • 9:30 a.m.–12 p.m. / 1:30 p.m.–6 p.m. • 09 85 13 66 35

Current promotions! Discover our leading brands at reduced prices!

1 4
🚛 Expédition sous 3 à 8 jours ouvrés 8 x 135 + 2 x 220 Watts RMS at 2 Ohms
Musway  |  SKU: M10 V2-512K

MUSWAY M10 – 10-Channel DSP Amplifier 14 Channels 8 x 135 + 2 x 220 WRMS 2 Ohm

€1,199.00
Tax included Shipping calculated at checkout.

Pre-order - Lead times and availability

Enjoy 5% off pre-order products, automatically applied at checkout.

Offer not valid on MTX Audio, Alpine, Focal, Pioneer, Kenwood, Dynavin, JVC and JBL products.

How to understand the displayed delivery times?

For greater transparency, we display the availability of each product in a box at the top of its product page:

  • 🟢 In stock: product available in our warehouse, ready to be shipped.
  • 🟠 Pre-order – X business days: average time to receive the product in our warehouse before it is shipped to you.

Delivery times are estimates and may vary depending on suppliers and shipping.

We do our best to provide you with clear and reliable information so that you can order with full knowledge of the situation.

Upon receipt of the product, your order is automatically prepared and shipped. You will receive tracking information by email.

Need fast delivery? Choose "In stock" products.

Free delivery from €49*

🚚 Free delivery on orders over €49 with Chronopost Économique to a pickup point (estimated delivery time of 4 to 10 business days).

Please note: some heavy or bulky parcels cannot be delivered to a pickup point and may require a contribution towards shipping and handling costs.

These costs are automatically calculated and displayed in your cart before you confirm your order.

Other faster delivery methods are also available depending on the products and your delivery address.

Delivery information

📦 Preparation and shipping

In-stock products ordered before 12 p.m. are generally shipped the same day. After 12 p.m., shipping generally takes place on the next business day.

Pickups are available Monday through Friday, excluding holidays.

🚚 Our delivery methods

  • Chronopost Économique pickup point: free delivery with purchases of €49 or more (4 to 10 business days).
  • Chronopost 24h pickup point: fast delivery to a pickup point.
  • 24h home delivery: our only home delivery option. Please note that this delivery method is not considered a guaranteed express delivery.

Delivery times begin once the carrier has accepted the package and are provided as estimates in business days.

Important: check that your product is listed as "In stock" on its product page. For pre-orders, shipping takes place only after the product has been received at our warehouse.

Some heavy or bulky packages may incur additional shipping and handling fees, which are automatically displayed in your cart.

⚠️ Receiving your package

Check the condition of your package before accepting it. In the event of damage, make specific reservations with the carrier or refuse the package if necessary.

If you experience any problems, please contact our customer service team promptly.

Advisory Service

Unsure about choosing a product or its compatibility? Our team is here to help!

📞 Phone: 09 85 13 66 35

💬 Live chat: directly on our website.

🕒 Our hours:

  • Tuesday to Saturday
  • Mornings: 9:30 am – 12:00 pm
  • Afternoons: 1:30 pm – 6:00 pm

Need help choosing your equipment?

Our advisors can guide you and even prepare your cart directly via chat, with products tailored to your needs.

💪 Take advantage of our technical expertise to order with complete confidence!

The Sound Auto Concept Team

Description

Ten amplified channels, fourteen processing channels

The MUSWAY M10 combines 10-channel Class D amplification with a built-in 14-channel DSP to drive a multi-way in-vehicle installation. Its two high-power channels and four pre-amplified outputs make it possible to build an expandable system in a 280 × 45 × 166 mm enclosure.

10 amplified channels
Class D
14-channel DSP
4 RCA pre-amplified outputs
8 × 135 + 2 × 220 W RMS
Rated power at 2 Ω

Highlights

Multi-way architecture

  • Ten amplified speaker outputs.
  • Two more powerful channels for low-frequency requirements.

Integration with the original system

  • Ten high-level inputs with EPS® protection.
  • Signals accepted up to 24 V RMS on channels 1 to 8 and 32 V RMS on channels 9 and 10.

Processing and expandability

  • Analog Devices ADAU1466 DSP and Burr-Brown PCM3168A converter.
  • Stereo PCM optical input and four RCA outputs configurable via DSP.

Description

The MUSWAY M10 is designed for in-vehicle audio installations requiring multiple amplified channels and centralized digital processing. It delivers 8 × 80 W RMS and 2 × 120 W RMS at 4 Ω, or 8 × 135 W RMS and 2 × 220 W RMS at 2 Ω. Channels 9 and 10 thus offer more power for low-frequency speakers.

Available from Sound Auto Concept, the M10 is notably an integration option for BMW or Mercedes installations using subwoofers under the seats or in the cabin. However, the connection, wiring harnesses, and compatibility must be checked according to the model and original audio system: no direct compatibility without adaptation is assumed.

Its ten high-level inputs receive speaker signals directly. EPS® technology aims to prevent errors in audio system diagnostics. The six low-level RCA inputs, the stereo auxiliary input on two RCA, and the PCM optical input offer several connection possibilities.

  • Operation compatible with automatic engine shut-off and restart systems and automatic ignition.
  • Input sensitivity separately adjustable for channels 1 to 8, channels 9 and 10, and the auxiliary input; clipping indicator.
  • Soft clipping with power attenuation when operating at 2 Ω.
  • Adjustment via DSP software and control via an optional compatible app.
  • Optional external Bluetooth® BTS, BTS-HD, and BTA-HD modules for audio streaming and control depending on the module chosen.
  • Optional myCON and DRC1 digital remote controls for various DSP functions.

Technical specifications

Feature Value
Brand / Model MUSWAY M10
Amplification class D
Amplified channels 10
DSP processing 14 channels
Rated RMS power at 4 Ω 8 × 80 W + 2 × 120 W
Rated RMS power at 2 Ω 8 × 135 W + 2 × 220 W
RMS bridged power at 4 Ω 4 × 270 W + 1 × 440 W
DHR dynamic reserve at 2 Ω, channels 1 to 8 Up to 155 W RMS per channel; value distinct from rated power
DHR dynamic reserve at 2 Ω, channels 9 and 10 Up to 220 W RMS per channel
High-level inputs 10 with EPS®
Acceptable high-level level, channels 1 to 8 24 V RMS
Acceptable high-level level, channels 9 and 10 32 V RMS
Low-level inputs 6 RCA
Auxiliary input Stereo on 2 RCA
Digital input 1 optical / PCM stereo
Pre-amplified outputs 4 RCA configurable via DSP
Speaker outputs 10 amplified
REV IN input 1 reverse signal input; exact function of the activated mode to be confirmed
Converter Burr-Brown PCM3168A
DSP processor Analog Devices ADAU1466
Signal-to-noise ratio 95 dB
Frequency response 15 Hz to 22 kHz at −3 dB
Total harmonic distortion 0.05% at 1 kHz, at 4 Ω, at 90% power
Optional accessories BTS, BTS-HD, BTA-HD modules; myCON and DRC1 remote controls
Dimensions 280 × 45 × 166 mm

Why choose it

  • To centralize ten amplified channels and fourteen-channel DSP processing.
  • To have two reinforced channels dedicated to low-frequency channels.
  • To integrate high-level signals with EPS® protection.
  • To expand the system using the four configurable pre-amplified outputs.
  • To choose between analog sources and PCM optical input.
⚠️ IMPORTANT - INSTALLATION: It is IMPERATIVE to connect this amplifier to the impedance recommended by the manufacturer and to use the recommended cable size. For amplifiers over 2000 W RMS, the vehicle's original battery is no longer sufficient. It is strongly recommended to adapt the power supply (additional battery, reinforced alternator) to the amplifier's consumption to avoid any risk of failure and ensure optimal performance. CAUTION: Any voltage drop below 12 V can damage the product.
Prepare your multi-way configuration.

Check the original audio system, impedances, necessary wiring harnesses, and optional accessories before installation. The mention of "DSP 512 kbits" and the exact function associated with REV IN in the provided data remain to be confirmed with the manufacturer.

Very popular at the moment
 Many people are looking at this product right now.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • BLIK
  • Cartes Bancaires
  • EPS
  • Google Pay
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store your credit card details and do not have access to your credit card information.

Musway

MUSWAY M10 – 10-Channel DSP Amplifier 14 Channels 8 x 135 + 2 x 220 WRMS 2 Ohm

€1,199.00

Ten amplified channels, fourteen processing channels

The MUSWAY M10 combines 10-channel Class D amplification with a built-in 14-channel DSP to drive a multi-way in-vehicle installation. Its two high-power channels and four pre-amplified outputs make it possible to build an expandable system in a 280 × 45 × 166 mm enclosure.

10 amplified channels
Class D
14-channel DSP
4 RCA pre-amplified outputs
8 × 135 + 2 × 220 W RMS
Rated power at 2 Ω

Highlights

Multi-way architecture

  • Ten amplified speaker outputs.
  • Two more powerful channels for low-frequency requirements.

Integration with the original system

  • Ten high-level inputs with EPS® protection.
  • Signals accepted up to 24 V RMS on channels 1 to 8 and 32 V RMS on channels 9 and 10.

Processing and expandability

  • Analog Devices ADAU1466 DSP and Burr-Brown PCM3168A converter.
  • Stereo PCM optical input and four RCA outputs configurable via DSP.

Description

The MUSWAY M10 is designed for in-vehicle audio installations requiring multiple amplified channels and centralized digital processing. It delivers 8 × 80 W RMS and 2 × 120 W RMS at 4 Ω, or 8 × 135 W RMS and 2 × 220 W RMS at 2 Ω. Channels 9 and 10 thus offer more power for low-frequency speakers.

Available from Sound Auto Concept, the M10 is notably an integration option for BMW or Mercedes installations using subwoofers under the seats or in the cabin. However, the connection, wiring harnesses, and compatibility must be checked according to the model and original audio system: no direct compatibility without adaptation is assumed.

Its ten high-level inputs receive speaker signals directly. EPS® technology aims to prevent errors in audio system diagnostics. The six low-level RCA inputs, the stereo auxiliary input on two RCA, and the PCM optical input offer several connection possibilities.

  • Operation compatible with automatic engine shut-off and restart systems and automatic ignition.
  • Input sensitivity separately adjustable for channels 1 to 8, channels 9 and 10, and the auxiliary input; clipping indicator.
  • Soft clipping with power attenuation when operating at 2 Ω.
  • Adjustment via DSP software and control via an optional compatible app.
  • Optional external Bluetooth® BTS, BTS-HD, and BTA-HD modules for audio streaming and control depending on the module chosen.
  • Optional myCON and DRC1 digital remote controls for various DSP functions.

Technical specifications

Feature Value
Brand / Model MUSWAY M10
Amplification class D
Amplified channels 10
DSP processing 14 channels
Rated RMS power at 4 Ω 8 × 80 W + 2 × 120 W
Rated RMS power at 2 Ω 8 × 135 W + 2 × 220 W
RMS bridged power at 4 Ω 4 × 270 W + 1 × 440 W
DHR dynamic reserve at 2 Ω, channels 1 to 8 Up to 155 W RMS per channel; value distinct from rated power
DHR dynamic reserve at 2 Ω, channels 9 and 10 Up to 220 W RMS per channel
High-level inputs 10 with EPS®
Acceptable high-level level, channels 1 to 8 24 V RMS
Acceptable high-level level, channels 9 and 10 32 V RMS
Low-level inputs 6 RCA
Auxiliary input Stereo on 2 RCA
Digital input 1 optical / PCM stereo
Pre-amplified outputs 4 RCA configurable via DSP
Speaker outputs 10 amplified
REV IN input 1 reverse signal input; exact function of the activated mode to be confirmed
Converter Burr-Brown PCM3168A
DSP processor Analog Devices ADAU1466
Signal-to-noise ratio 95 dB
Frequency response 15 Hz to 22 kHz at −3 dB
Total harmonic distortion 0.05% at 1 kHz, at 4 Ω, at 90% power
Optional accessories BTS, BTS-HD, BTA-HD modules; myCON and DRC1 remote controls
Dimensions 280 × 45 × 166 mm

Why choose it

  • To centralize ten amplified channels and fourteen-channel DSP processing.
  • To have two reinforced channels dedicated to low-frequency channels.
  • To integrate high-level signals with EPS® protection.
  • To expand the system using the four configurable pre-amplified outputs.
  • To choose between analog sources and PCM optical input.
⚠️ IMPORTANT - INSTALLATION: It is IMPERATIVE to connect this amplifier to the impedance recommended by the manufacturer and to use the recommended cable size. For amplifiers over 2000 W RMS, the vehicle's original battery is no longer sufficient. It is strongly recommended to adapt the power supply (additional battery, reinforced alternator) to the amplifier's consumption to avoid any risk of failure and ensure optimal performance. CAUTION: Any voltage drop below 12 V can damage the product.
Prepare your multi-way configuration.

Check the original audio system, impedances, necessary wiring harnesses, and optional accessories before installation. The mention of "DSP 512 kbits" and the exact function associated with REV IN in the provided data remain to be confirmed with the manufacturer.

View product
Back to top