Alternator/battery reinforcement pack

We offer several delivery options to meet your needs.

Free shipments are made via a relay point.

If you prefer home delivery, a surcharge may apply when ordering. Do not hesitate to contact us for more details!

Our team is at your disposal via Chat to help you select the products that suit you best 💡😉

We can help you create a cart directly via live chat if you are not sure about your choice. Our team will be happy to offer you their technical expertise 💪🙂

To track your order, we invite you to use the Chat available at the bottom right of the store ➡️⬇️

If you have any questions regarding your order, Our team will answer you as soon as possible 🙂

For returns, you have 14 days after receiving your items to return them if you are not completely satisfied 🔁

For detailed information on the procedures, we invite you to consult our return policy or contact us directly 📧

The Auto-Connect BIG3OFC system is a must-have for anyone who wants to run a powerful sound system in their car. The cable set contains everything you need to replace the original power and ground cables in the engine compartment, from the alternator to the battery, to create the best conditions for sufficient power supply.

Using a capacitor can be a solution to reduce voltage drop. However, the capacitor only helps in case of extreme peaks and does not solve the basic problem itself. Due to the small original cross-section from the alternator to the original battery, some current is lost. With the Big3 upgrade, the cross-section is significantly increased and the voltage is maximized, allowing more current to be delivered.

Scope of delivery:
2x 1.2m 50mm² 100% copper ground cable
1x 1.8 m 50 mm2 100% copper power cable
10 pieces of cable ties and screws for fixing cables
10 pieces of cable ties
3 pieces of ring terminals
3 pieces of heat shrink tubing

Instructions :
1. The 1.8m power cable is connected to the positive pole of the battery and the alternator
2. One of the two ground cables is run from the negative battery terminal to a properly cleared ground point
3. The second ground cable is laid from the alternator to a properly cleared ground point
4. Now secure all cables with the installation accessories so that no cables can move freely and they are securely fixed.