Amplificateur 2x100WRMS @ 4Ohms / 2x150WRMS @ 2Ohms / 1x300WRMS @ 4Ohms Bridge
| CEA-2006 Compliant: |
 CEA-2006 Power Rating
100W x 2 @ 4Ω
≤1.0% THD+N |
Rated Power
(RMS Continuous Power): |
100 Watts x 2 @ 4-Ohm
150 Watts x 2 @ 2-Ohm
300 Watts x 1 @ 4-Ohm Bridged |
Total Power
(Sum of Rated Power): |
300 Watts |
Dynamic Power
(PVC/PowerCube®): |
114 Watts x 2 @ 4-Ohm
160 Watts x 2 @ 2-Ohm
387 Watts x 1 @ 4-Ohm Bridged |
| Frequency Response: |
20Hz - 20kHz +/-3dB |
| Efficiency (average): |
68% @ 4-Ohm |
| Total Harmonic Distortion (THD+Noise): |
4-Ohm: <1.0%
2-Ohm: <1.0% |
| Signal-to-Noise (CEA): |
84 dB |
| Channel Separation: |
65 dB |
| Common Mode Rejection: |
62 dB |
| Crossover Controls: |
High-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
Low-Pass: 50Hz - 500Hz @ 12dB/Octave Butterworth
All-Pass: Yes |
| Tone Controls: |
Optional Remote Punch EQ |
| Input Sensitivity: |
150 mV - 11 V |
| Signal Input: |
High/Low Level Input: 4-Pin harness
Hi-Level Sensitivity: Variable DC offset sensitivity |
| Power Input Connector: |
Detachable Compression Terminal |
| Speaker Output Connector: |
4-Pin Harness |
| Speaker Wire Gauge: |
16 AWG |
| Heat Sink Type: |
Extruded Aluminum |
| Remote Controls: |
Optional PEQ provides 0dB to +18dB @ 45Hz |
| Visual Indicators: |
Power/Protect, BRT (Boost) |
| Circuit Topology Class: |
Class BR |
| Operating Voltage: |
9 - 16 VDC |
Recommended Fuse
(not included): |
50 A |
| Max. Current Draw (13.8V Sinewave): |
45 A |
| Average Current Draw (13.8V Music): |
23 A |
| Suggested Alternator: |
75 A |
| Shipping Weight: |
2.8 Lbs. (1.27 Kg.) |
| Dimensions (H x W x D): |
1.53 x 4.25 x 6.75 (in.)
3.90 x 10.8 x 17.2 (cm) |
